×

警告

JUser: :_load:无法加载ID为:868 的用户

Arduino LUCKY SHIELD

拥有Arduino Lucky Shield很幸运!一个扩展板有多个传感器。

Arduino Lucky Shield让使用Arduino板更容易,可查看大气压力、相对高度、亮度、温度、运动和存在。你还可将它变成一个简单的控制器和OLED(有机发光二极管)显示系统。它是物联网的完美扩展板。

 

Developed in cooperation with BOSCH

Shield_co-dev_image

WOULD YOU LIKE TO BUY AN Arduino LUCKY SHIELD?

概况
Arduino Lucky Shield is an easy way to use your Arduino boards, that grants you access to barometric pressure, relative altitude, luminosity, temperature, motion and presence. You can also turn it into a simple controller and OLED display system. It is the perfect shield for IoT.

Features

Relays

OMRON G6RL-1 (5V DC)

PIR Sensor

MOSDESIGN M7616

Ambient Light Sensor

EVERLIGHT ALS-PT19-315C/L177/TR8

Humidity Sensor

BOSCH SENSORTEC BME 280

Temperature Sensor

BOSCH SENSORTEC BME 280

Pressure sensor

BOSCH SENSORTEC BME 280

3-axis magnetometer

NXP MAG3110

3 Axis accelerometer

NXP MMA8491Q

Buzzer

PUI AUDIO SMT-0927-S-6-R

Joystick

5-directional tact switch

General

Operating Voltage

3.3 V / 5 V

Extra

DogOLED support

PCB size

53 x 68.5 mm

Weight

0.054 Kg

Product Code

A000125

说明
Operating voltage:  3.3 VDC / 5 VDC

LEDs:  POWER (Green) . LED1 (Yellow) . LED2 (Yellow)

Joystick: 5-directional tact switch

Buzzer:  MINIMUM SPL   90 dBA RESONANT FREQUENCY  500 Hz

Relay: 50000 operations min (NC) at 250VAC, 8A (resistive load) 50000 operations min at 30 VDC, 5A (resistive load)

PIR sensor: Encapsulation type TO5, Spectral response 7~14μm, Transmittance ≥77%, Field of view 139º

Ambient light sensor: Peak sensitivity wavelength 630nm , Operating temperature  -40 ~ +85°C

Temperature / humidity: Operating temperature  -40 ~ +85°C

Pressure sensor: Operating pressure range  300 ~ 1100 hPa

Magnetometer: E-compass, Full-scale range ±1000 T, Output data rates (ODR) up to 80 Hz

Accelerometer: G-sensor, Ultra-fast data output time, ~700 μs ±8g full-scale range 3-axis, 45° tilt outputs


Arduino Lucky Shield schema
电源
The shield doesn't need external power. It will be provided by the Arduino base board, through the 5V and 3.3V pins of the base.
物理特性
The maximum length and width of the Lucky Shield PCB are 2.7 by 2.1 inches,respectively (68.6 x 53.4 mm). Four screw holes allow the Shield to be attached to a surface or case. Note that the distance between digital pins 7 and 8 is 160 mil (0.16"), not an even multiple of the 100 mil spacing of the other pins.
兼容性 Boards
The shield is compatible with all Arduino board 5V and 3.3V standards.

原理图与参考设计

常见问题

If you couldn’t find what you were looking for, please see our Forum Section

Lucky - for controlling Arduino Lucky Shield
It does not provide connectors for TinkerKit components
Look the comparative table to know about the Arduino Shields compatibility.